RM 115.90 RM 115.90
Product details of NEW Waterproof Dog 500M LCD No-bark Collar Electric Shock Pet Training Remote For a dog Features: 1.Remote transmitter is small,flexible and simple to use. 2.Receiver collar is highly waterproof, so your pet can wear it and swim in the water. 3.It has 3 functional modes: static shock/vibration /sound. 4.Levels of vibration and static shock are adjustable,and a proper level has to be determinedm when you use this pet training systerm for the first time,you are advised to try Level 1-100 gradually. 5.The remote distance is 500 yards(without any disturbance). 6.There are two signal channels on the remote transmitter,it can control two receivers of the same model. 7.Energy-saving design:automatic stand by model and memory functions. 8.This model is suitable for most large,medium and small-sized dogs. Related description: .Antenna: transmit the signal to receiver collar. .LCD screen: display the various functions and levels. .Sound function button: press this button, the receiver can be sound, the leavel is not adjustable, the display show 000 only. .Static shock function button: press this button, the receiver will release static shock, and press the + / - button can adjust level from 0 to 100. .Vibration function button: press this button, the receiver will vibrate; press the + / - button, you can adjust level from 0 to 100. .The +/- button: can adjust the vibration and static shock level. .Flashlight: when you press 3 fountion button, the light will flicker; when charging, the light will be blue colour. .Signal channel button: before connect signal between remote and receiver, press this button can choose the channel 1 or 2 as the pet training signal channel. Note: PD 520-1:It has 1 receiver, you can choose 1 signal channel, please remember this channel in the future when you use it. PD 520-2:It has 2 receivers,you need to choose channel for each one, you can separate control. According to the following discriptions, you need to use the true method to contact signal between remote and receiver. . The charging hole of remote: you can charge the remote here. .ON/OFF button:you can open or close receiver, contact signal to the remote, or reset signal. .Flashlight:It has different shows when charging and work,the following will introduce it. .Contact points (static shock): choose a suitable length to fit for different thickness dog hair, can conduct static easier and train your dog convenient. .The charging hole of receiver: open the rubber cover, you can charge the receiver here. Contact signal between remote and receiver: 1.Open the remote transmitter, adjust the level of vibration or static shock above 0. 2.Press the "1/2" button to choose a signal channel you want to use. 3.Press the ON/OFF button of receiver, the receiver will has a short "beep" sound, now the receiver is opening.then the red LED light will flash one time every 8 seconds. 4.After the receiver opening, press on/off button for 1 second,the red light will become fast flicker,the fast flicker will last for 10 seconds, at this time you must press function button(static shock/vibration /sound,which one all can be) of the remote,then you can listen a beep sound,it prove the remote and receiver contact signal successful. 5.If you do not press the function button within 10 seconds, please contact them again. 6.If you have 2 receivers, switch the "1/2" button to choose another channel for signal contact. Important Notice: 1.Please keep in mind the signal channel you choose, Please do not change to another one or the remote control will be invalid. 2.You need to contact signal between remote transmitter and receiver before you use it. Please follow the manual when you use it on the first time. Warm Notice: 1.Both the remote transmitter and receiver are energy-saving desgned.The remote will go into stand by mode if there is no operation after 1 minute,and press the function button you can activate the remote from stand by mode.The receiver will go into stand by mode if no operation after 5 minutes.And any movement will activate the receiver. 2.A start up roller is contained in receiver, so you will hear sound when the receiver shaking,please do not suspect it as any parts falling off. You need charge the remote and receiver before you start using it for the first time. How to charge the remote? 1.Connect the remote transmitter to a charger into a standard socket. 2.The LED light on the remote turns blue when charging. 3.Once the remote is fully charged,the blue LED light turn off automatically. How to charge the receiver? 1.Open the rubber cover,connect the receiver to a charger into a standard socket. 2. The LED light on the receiver turns red when charging. 3.Once the receiver is fully charged,the red LED light turn off automatically. Warm Notice: 1.Charge the remote transmitter and receiver at least 6 hours for the first charging. 2.Functions of receiver are disabled and out of control of remote when being charged. 3.Low battery indicator symbol will be displayed on LCD screen. 4.The receiver will turn off automatically when battery energy is low after 10 seconds beep sound. 5.This product is rechargeable.In order to keep it continuous use,please charge it once a monthly if it is not used. Test PaiPaitek Pet Training Systems:Static shock function test: Static shock function can not be seen with the naked eye, please use our test light. Before test, please adjust the static shock above 0 level. Press the static shock function button, the test light will shine. Vibration function test: Before the test, please adjust the vibration above 0 level. Press the vibration function button, the receiver will shake. Sound function test: Sound function does not need to adjust, LCD screen display 000. Press the alarm button, the receiver will make a sound.